High-pressure hoses DIN EN 856 R13 with four or six metal windings are used to supply liquids (oils, fuels and water-oil emulsions) to hydraulic systems of various mechanisms and equipment.
Hose R13 is used in the presence of increased impulse loads in hydraulic systems
Inner layer – oil-resistant synthetic rubber
Reinforcement – four/six high-strength metal windings
Outer layer – abrasion- and ozone-resistant synthetic rubber
Temperature range – from -40°C to +100°C
DN20 – DN25 – four metal windings. DN32 – DN50 – six metal windings.
| Ø internal. | Ø external. | P working. | P breaking. | R bending | |
| DN | in | mm | bar | bar | mm |
| 20 | 3/4″ | 32 | 345 | 1380 | 240 |
| 25 | 1″ | 38.4 | 345 | 1380 | 300 |
| 32 | 1,1/4″ | 49.3 | 345 | 1380 | 420 |
| 38 | 1,1/2″ | 57.3 | 345 | 1380 | 500 |
| 50 | 2″ | 71.6 | 345 | 1380 | 630 |
High-pressure hoses R15 with four or six metal windings are used to supply liquids (oils, fuel and water-oil emulsions) to hydraulic systems of various mechanisms and equipment.
R15 hoses are used in the presence of increased impulse loads in hydraulic systems.
Inner layer – oil-resistant synthetic rubber
Reinforcement – four/six high-strength metal windings
Outer layer – abrasion- and ozone-resistant synthetic rubber
Temperature range – from -40°C to +100°C
DN20 – DN25 – four metal windings. DN32 – DN40 – six metal windings.
| Ø internal. | Ø external. | P working. | P breaking. | R bending | |
| DN | in | mm | bar | bar | mm |
| 20 | 3/4″ | 32 | 420 | 1680 | 265 |
| 25 | 1″ | 38.4 | 420 | 1680 | 330 |
| 32 | 1,1/4″ | 49.3 | 420 | 1680 | 445 |
| 38 | 1,1/2″ | 57.3 | 420 | 1680 | 530 |
Due to its compactness and wear resistance, the R8 high-pressure hose is widely used in warehouse and road construction equipment.
Inner layer – thermoplastic polyester, highly resistant to chemicals.
Reinforcement – two high-strength Kevlar braids.
Outer layer – abrasion-resistant polyurethane.
Temperature range – from -40°C to +93°C (max. 120°C)
| Ø internal. | Ø external. | P working. | P breaking. | R bending | |
| DN | in | m | bar | bar | mm |
| 5 | 3/16″ | 8.9 | 350 | 1400 | 30 |
| 6 | 1/4″ | 11.5 | 350 | 1400 | 50 |
| 8 | 5/16″ | 13.4 | 300 | 1200 | 55 |
| 10 | 3/8″ | 15.5 | 280 | 1120 | 60 |
| 12 | 1/2″ | 19.9 | 245 | 980 | 80 |
| 16 | 5/8″ | 23.4 | 200 | 800 | 125 |
| 20 | 3/4″ | 26.9 | 165 | 660 | 150 |
| 25 | 1″ | 32.2 | 140 | 560 | 200 |
High-temperature hose DIN EN 853 1SN is used to supply liquids (oils, fuels and water-oil emulsions) to hydraulic systems of various mechanisms and equipment. It has a wide range of operating temperatures.
High-temperature hoses 1SN are used in mining, construction, road, agricultural, oil production and other industries.
Inner layer – oil-resistant synthetic rubber
Reinforcement – one high-strength metal braid
Outer layer – abrasion- and ozone-resistant synthetic rubber
Temperature range – from -40°C to +135°C (short-term up to 150°C)
| Ø internal. | Ø external. | P working. | P breaking. | R bending | |
| DN | in | mm | bar | bar | mm |
| 5 | 3/16″ | 11.6 | 250 | 1000 | 90 |
| 6 | 1/4″ | 13.2 | 225 | 900 | 100 |
| 8 | 5/16″ | 14.8 | 215 | 850 | 115 |
| 10 | 3/8″ | 17.2 | 180 | 720 | 130 |
| 12 | 1/2″ | 20.4 | 160 | 640 | 180 |
| 16 | 5/8″ | 23.5 | 130 | 520 | 200 |
| 20 | 3/4″ | 27.5 | 105 | 420 | 240 |
| 25 | 1″ | 35.4 | 88 | 350 | 300 |
| 32 | 1,1/4″ | 43.5 | 63 | 250 | 420 |
| 38 | 1,1/2″ | 50 | 50 | 200 | 500 |
| 50 | 2″ | 63.6 | 40 | 160 | 630 |
High-temperature hose DIN EN 853 2SN has two metal braids and is used to supply liquids (oils, fuel and water-oil emulsions) to hydraulic systems of various mechanisms and equipment. It has a wide range of operating temperatures.
High-temperature hoses 2SN are used in mining, construction, road, agricultural, oil production and other industries.
Inner layer – oil-resistant synthetic rubber
Reinforcement – two high-strength metal braids
Outer layer – abrasion- and ozone-resistant synthetic rubber
Temperature range – from -40°C to +135°C (short-term 150°C)
| Ø internal. | Ø external. | P working. | P breaking. | R bending | |
| DN | in | mm | bar | bar | mm |
| 5 | 3/16″ | 11.6 | 250 | 1000 | 90 |
| 6 | 1/4″ | 13.2 | 225 | 900 | 100 |
| 8 | 5/16″ | 14.8 | 215 | 850 | 115 |
| 10 | 3/8″ | 17.2 | 180 | 720 | 130 |
| 12 | 1/2″ | 20.4 | 1600 | 640 | 180 |
| 16 | 5/8″ | 23.5 | 130 | 520 | 200 |
| 20 | 3/4″ | 27.5 | 105 | 420 | 240 |
| 25 | 1″ | 35.4 | 88 | 350 | 300 |
| 32 | 1,1/4″ | 43.5 | 63 | 250 | 420 |
| 38 | 1,1/2″ | 50 | 50 | 200 | 500 |
| 50 | 2″ | 63.6 | 40 | 160 | 630 |
PTFE sleeve (Teflon hose) has high heat resistance and chemical resistance, is widely used in the chemical, food and medical industries.
Inner layer – smooth fluoroplastic tube
Reinforcement – one braid of stainless steel AISI 304
Temperature range – from -70 ° C to + 260 ° C
| Ø internal. | Ø met. | Ø external. | P working. | P breaking. | R bending | Ø external. |
| DN | in | mm | mm | bar | bar | DN |
| 5 | 3/16″ | 7,49 | 264 | 793 | 64 | 4,85 |
| 6 | 1/4″ | 8,83 | 224 | 672 | 76 | 6,45 |
| 8 | 5/16″ | 10,54 | 207 | 621 | 102 | 8,15 |
| 10 | 3/8″ | 12,78 | 183 | 552 | 133 | 9,93 |
| 12 | 1/2″ | 15,88 | 161 | 483 | 152 | 13,06 |
| 16 | 5/8″ | 18,95 | 114 | 345 | 178 | 16,01 |
| 19 | 3/4″ | 22,15 | 103 | 310 | 203 | 19,3 |
| 25 | 1″ | 28,45 | 80 | 241 | 305 | 25,06 |
PTFE sleeve (Teflon hose) has high heat resistance and chemical resistance, is widely used in the chemical, food and medical industries.
Inner layer – corrugated tube made of fluoroplastic
Reinforcement – one braid of stainless steel AISI 304
Temperature range – from -70 ° C to + 260 ° C
| Ø internal. | Ø external. | P working. | P breaking. | R bending | |
| DN | in | mm | bar | bar | mm |
| 6 | 1/4″ | 8.83 | 224 | 672 | 76 |
| 8 | 5/16″ | 10.54 | 207 | 621 | 102 |
| 10 | 3/8″ | 12.78 | 183 | 552 | 133 |
| 12 | 1/2″ | 15.88 | 161 | 483 | 152 |
| 16 | 5/8″ | 18.95 | 114 | 345 | 178 |
| 20 | 3/4″ | 22.15 | 103 | 310 | 203 |
| 25 | 1″ | 28.45 | 80 | 241 | 305 |
| 32 | 1,1/4″ | 39.0 | 34 | 103 | 125 |
| 38 | 1,1/2″ | 46.99 | 30 | 90 | 150 |
| 51 | 2″ | 58.67 | 23 | 69 | 200 |
Inner layer: oil-resistant synthetic rubber
Reinforcement: 4 layers of steel wire winding
Outer layer: synthetic rubber, resistant to the atmosphere
Working temperature: from -40°C to +100°C (+125°C for a short time)
Applied specifications: EN 856 4SH – ISO 3862 4SH
Main features: over 1 million impulse load cycles. Increased working pressure. Compatible with all synthetic and mineral oils.
Main application: high-pressure lines in machines and mechanisms
Applied liquids: mineral oils, vegetable and rapeseed oils, glycol and polyglycol based oils, synthetic ester based oils, oils in water-soluble emulsion, water
Note: halogen-free hoses
| Ø internal. | Ø met. | Ø external. | P working. | P breaking. | R bending | Weight | |
| DN | in | mm | mm | bar | bar | mm | kg/m |
| 19 | 3/4″ | 28,2 | 31,9 | 420 | 1750 | 210 | 1520 |
| 25 | 1″ | 35,1 | 38,1 | 385 | 1750 | 220 | 2070 |
| 31 | 1,1/4″ | 42,2 | 45 | 350 | 1400 | 420 | 2450 |
| 38 | 1,1/2″ | 49,1 | 53,1 | 300 | 1250 | 560 | 3200 |
| 51 | 2″ | 63,5 | 67,5 | 250 | 1000 | 700 | 4500 |
Inner layer: oil-resistant synthetic rubber
Reinforcement: 4 layers of steel wire winding
Outer layer: synthetic rubber, resistant to the atmosphere
Working temperature: from -40°C to +100°C (+125°C for a short time)
Applicable specifications: EN 856 4SP – ISO 3862 4SP
Approvals: ABS, BV, DNV, GL, GOST-R, KRS, LR, MSHA
Main features: over 1 million impulse load cycles. Increased working pressure. Compatible with all synthetic and mineral oils.
Main application: high pressure lines in machines and mechanisms
Applicable liquids: mineral oils, vegetable and rapeseed oils, glycol and polyglycol based oils, synthetic ester based oils, oils in water-soluble emulsion, water
Note: halogen-free hoses
| Ø internal. | Ø met. | Ø external. | P working. | P breaking. | R bending | Weight | |
| DN | in | mm | mm | bar | bar | mm | kg/m |
| 6 | 1/4″ | 14,7 | 17,6 | 485 | 2400 | 100 | 600 |
| 10 | 3/8″ | 17,6 | 21,1 | 450 | 2000 | 110 | 760 |
| 12 | 1/2″ | 20,3 | 24,3 | 420 | 1750 | 120 | 900 |
| 16 | 5/8″ | 23,7 | 27,9 | 380 | 1600 | 140 | 1120 |
| 19 | 3/4″ | 28,2 | 31,9 | 380 | 1600 | 170 | 1490 |
| 25 | 1″ | 35 | 39 | 320 | 1400 | 340 | 1950 |
Inner layer: oil-resistant synthetic rubber
Reinforcement: 2 layers of steel wire braiding
Outer layer: weather-resistant synthetic rubber
Operating temperature: from -40°C to +100°C (+121°C for a short time)
Applicable liquids: mineral oils, vegetable and rapeseed oils, glycol and polyglycol-based oils, synthetic ester-based oils, oils in water-soluble emulsion, water
Applicable specifications: EN 853 2SN – SAE 100 R1AT -ISO 1436 2SN/R1AT
Approvals: ABS, BV (DN 5+51), DNV, FRAS (DN 5+12), GL (DN 5+51), GOST-R, KRS, LR
| Ø internal. | Ø external. | P working. | P breaking. | R bending | Weight | |
| DN | in | mm | bar | bar | mm | kg/m |
| 5 | 3/16″ | 13,3 | 415 | 1650 | 89 | 315 |
| 6 | 1/4″ | 14,7 | 400 | 1600 | 100 | 370 |
| 8 | 5/16″ | 16,3 | 350 | 1400 | 114 | 410 |
| 10 | 3/8″ | 18,7 | 330 | 1320 | 127 | 530 |
| 12 | 1/2″ | 21,8 | 275 | 1100 | 178 | 620 |
| 16 | 5/8″ | 25 | 250 | 1000 | 200 | 720 |
| 19 | 3/4″ | 29 | 215 | 860 | 240 | 940 |
| 25 | 1″ | 36,8 | 165 | 660 | 300 | 1290 |
| 31 | 1,1/4″ | 47 | 125 | 500 | 419 | 1910 |
| 38 | 1,1/2″ | 53,4 | 90 | 360 | 500 | 2250 |
| 51 | 2″ | 66,2 | 80 | 320 | 630 | 2900 |